代表性科研成果(著作、论文、专利等):
1. A Correction Method of Estimating the Pointing Error for Reflector Antenna, Jie Zhang, Jin Huang, Wei Liang, Youran Zhang, Qian Xu, Letian Yi and Congsi Wang, Shock and Vibration, 2018
2. 新疆奇台110米射电望远镜主焦点馈源换馈方案研究,赵聪、许谦、王娜、项斌斌,天文研究与技术,2017
3. 新疆110m射电望远镜(QTT)天线高精度面板结构研制挑战,许谦、温浩兴、王娜、李琳,中国科学:物理学 力学 天文学,2017
4. Temperature Distribution and Influence Mechanism on Large Reflector Antennas under Solar Radiation, C. S. Wang, S. Yuan, X. Liu, Q. Xu, M. Wang, M. B. Zhu, G. D. Chen, Y. H. Duan, Radio Science, 2017
5. An adjustment method for active reflector of large high-frequency antennas considering gain and boresight, Cong-Si Wang, Lan Xiao, Wei Wang, Qian Xu, Bin-Bin Xiang, Jian-Feng Zhong, Li Jiang, Hong Bao, Na Wang, Research in Astronomy and Astrophysics, 2017
6. 大型射电望远镜天线主动面补偿研究进展,王从思、肖岚、项斌斌、王伟、许谦、蒋力、王娜、段宝岩,中国科学:物理学力学 天文学,2017
7. Challenges for QTT Structure, Qian Xu, Na Wang, Proc. of SPIE, 2016
8. QTT天线结构挑战与进展,许谦、王娜,天文学进展,2016
9. 区间二型模糊PI/PD控制器设计与结构分析,雷宾宾、保宏、许谦,电机与控制学报,2016
10.Derivation and analysis on the analytical structure of interval type-2 fuzzy controller with two nonlinear fuzzy sets for each input variable, Bin-bin LEI, Xue-chao Duan, Hong BAO, Qian XU, Frontiers of Information Technology& Electronic Engineering, 2016
11.An active surface adjustment method for large high-frequency antennas considering gain and boresight, Lan Xiao, Congsi Wang, Binbin Xiang, Qian Xu, Baofu Tang, Jianfeng Zhong, Jie Zhang, Shufei Feng, Li Jiang, Yi Pang, The 12th International Conference on Frontiers of Design and Manufacturing, Aug 10-12, 2016, Shenyang, China
12.Preliminary research on Connecting Strategy between Back-up Structure and Alidade for 110-m QiTai Radio Telescope, Qian Xu, Lin Li, Anyu Cheng, Applied Mechanics and Materials, 2015
13.基于有线元方法的25m天线座架结构热特性分析,常文文、艾力玉苏甫、许谦等,机械科学与技术,2015
14.Structural-electromagnetic coupling based least squares compensation method for active phased array antenna, Y. Wang, C.S. Wang, S. Yuan, J. Mao, B.F. Tang, J.F. Zhong, Y.Q. Zhang, Q. Xu, B.B. Xiang, T. Yu, Best Paper Award of The Fifth Asia International Symposium on Mechatronics (AISM 2015) October 7-10, 2015, Guilin, China |